PHB-3000 Hydraulic Brinell Hardness Tester

PHB-3000 Hardness Tester adopts hydraulic principle and applies 3000kgf test force by hand operation. The central part of PHB-3000 is a small hydraulic system in which a release valve is used to control the test force. When the test force rises 3000kgf, the release valve will open and pressure will fall down, and it needs to apply the test force repeatedly 3-4 times to make the needle of the pressure gauge point to 3000kgf for 3-4 times. Thus it is equivalent to the test condition of Brinell hardness tester method to hold 3000kgf test force with 10mm ball for 10-15 seconds, which complies with ASTM E110.The accuracy and performance can reach the level of hydraulic King Brinell hardness tester.

PHB-3000 Hydraulic Brinell Hardness Tester Operation Video

Features of PHB-3000 Hydraulic Brinell Hardness Tester

1On-site TestingIt can be used in workshop, simple operation, easy carrying, and testing ontic hardness of large parts. It is convenient to test piece by piece.

2Permanent IndentationBy 3000kgf and 10mm ball, the indentation is permanent for re-inspection.

3High ReliabilityIt follows the Brinell hardness test method completely, the same as desk testers, reflecting the actual mechanical property of material or parts.

4Wide Appilcation RangeAs long as clamped to the parts, it could test parts in any shapes and sizes.

5Wide Testing RangeIt could test various common metal materials by the combination of different test force, indenters and anvils, that is wide testing range.

Technical Parameters of PHB-3000 Hydraulic Brinell Hardness Tester

Test Force: 3000kgf(1000kgf, 750kgf, 500kgf optional) Test Ball: 10mm Carbide test ball (5mm optional) Test Range: 32-650HBW Opening Dimension: 350mm( Height)*100mm(Throat depth) Indicator Error: Complies with ISO 6506, and ASTM E10 Repeatability Error: Complies with ISO 6506, and ASTM E10 Test Force Error: ≤1% and Complies with ISO 6506, and ASTM E10

---

Relevant Standards of PHB-3000 Hydraulic Brinell Hardness Tester

ASTM Standards

ASTM E10-14 Standard Test Method for Brinell Hardness of Metallic Materials

International Standards

ISO 6506-2:2014 Metallic Materials- Brinell Hardness Test-Part 2: Verification and Calibration of Hardness Testing Machines.

---

Package of PHB-3000 Hydraulic Brinell Hardness Tester